drying machine
Welcome to Sunco Machinery  |  Site Map  |  Contact us

NEWS CENTER

You are here: Home > News & Events >> Industry News

Work Flow of Raw Gypsum Grinding Mill Plant

Time:2018年05月28日      Hits:

Work Flow of Raw Gypsum Grinding Mill Plant /gypsum crushing machine is as follows:

Raw Gypsum Grinding Mill Plant, gypsum crushing machine, Gypsum Mill, Gypsum Grinding Mill, Gypsum Grining Machine

01. Rock Crusher crushes the raw gypsum stone into the size less than 30mm in advance, so that it is suitable to be grinded into powder by the grinding mill.

02. Bucket Elevator sends the size less than 30mm raw gypsum stone into hopper.

03. Hopper is used to store the size less than 30mm raw gypsum, and on the bottom of the hopper, install one vibrating feeder.

04. Vibrating feeder sends the size less than 30mm raw gypsum into the grinding chamber of the gypsum grinding mill evenly as need.

05.Inside the grinding chamber, the roller is rotating in high speed, and work together with the Ring to grind the raw gypsum into powder.

Raw Gypsum Grinding Mill Plant, gypsum crushing machine, Gypsum Mill, Gypsum Grinding Mill, Gypsum Grining Machine

06. Blower makes the gypsum powder moves to the top of the grinding mill. On the top of the grinding mill, there is powder classifier which is used to control and select the final powder output size.

The powder classifier is rotating in high speed.  By adjusting the rotation speed of powder classifier, can control the final powder output size.

The higher the rotation speed of the powder classifier is, the smaller the final powder fineness will be. On the electric control cabinet, there is one electric meter for the powder classifier specially. 

Raw Gypsum Grinding Mill Plant, gypsum crushing machine, Gypsum Mill, Gypsum Grinding Mill, Gypsum Grining Machine

07. The needed final fine powder leaves the grinding mill, and goes into the cyclone powder collector, and to be collected. The final fine powder finally come out of the cyclone powder collector, and then pack it into bags as need.

08. Bag filter is used to collect the dust in the exhaust air.

09. Electric Control Cabinet is used to control the whole grinding mill plant.

For more detail of raw gypsum crushing machine, please contact us by email to:

suncomachinery@hotmail.com 

Inquiry
Note: Please feel free to give your inquiry in the form below. We will reply you with details within 24 hours.
Topic: *
Company:
Name: *
Tel: *
E-mail: *
Message: