drying machine
Welcome to Sunco Machinery  |  Site Map  |  Contact us

NEWS CENTER

You are here: Home > News & Events >> Industry News

Slag Dryer for drying Blast Furnace Slag in Portlant Cement Production

Time:2016年09月09日      Hits:

Blast furnace slag has been used for many years as a supplementary cementitious material in Portland cement concrete, either as a mineral admixture or as a component of blended cement.

The use of Blast furnace slag as a partial Portland cement replacement takes advantage of the energy invested in the slag making process and its corresponding benefits with respect to the enhanced cementitious properties of the slag. Grinding slag for cement replacement requires only about 25 percent of the energy needed to manufacture Portland cement.

Moisture in blast furnace slag, which occurs in the granulation process or in pelletized slag, should be removed by drying prior to the use of Blast furnace slag as either an additive to Portland cement or a mineral admixture to Portland cement concrete. 

Then Slag Rotary Dryer is the ideal drying machine for Blast furnace slag. Slag Dryer machine can dry the wet blast furnace slag with moisture content about 15% to be less than 1.5% as demand.

Slag Dryer for drying Blast Furnace Slag, Slag Dryer, Blast Furnace Slag Dryer

Slag drying line mainly consists of the rotating cylinder, high-speed breakup equipment, lifting plate, self-cleaning device, gear transimission device, hot air furnace, reducer machine, supporting device, sealing device, air duct system, dust cyclone separator,etc.

Sunco Machinery can design the needed capacity Slag Drying System according to the customer's need specially. If you are interested in the Slag Dryer, please contact Sunco Machinery at email: suncomachinery@hotmail.com .

Inquiry
Note: Please feel free to give your inquiry in the form below. We will reply you with details within 24 hours.
Topic: *
Company:
Name: *
Tel: *
E-mail: *
Message: