drying machine
Welcome to Sunco Machinery  |  Site Map  |  Contact us

NEWS CENTER

You are here: Home > News & Events >> Industry News

Wood Chips Rotary Dryer

Time:2014年08月26日      Hits:

Wood Chips Rotary Dryer is developed from the rotary drum dryer, and wood chip dryer by Sunco Machinery is specially designed according to the features of wood chips or sawdust.

The features of the wet wood chips are as follows:

1- Light, low bulk density,

2- the humidity of wood chips is not easy to be got rid of;

3- Not even size of wood chips,

4- Can be dried by hot flue gas directly.

Wood Chips Rotary Dryer , wood chips dryer, wood chip dryer

Thus, according to the features of the wet wood chips, the key points for Sunco Machinery Engineer to design the wood chips dryer are as follows:

1- High temperature drying, near the feed inlet of the wood chip dryer, the hot air temperature is about 200 - 240 centigrade.

2- Long Drying time. Sunco Machinery wood chips dryer is triple pass wood chip dryer, and the wet wood chips needs to pass through the drum  three times, and come to the high temperature zone two times.

3- High heat exchange efficiency. In order to increase the heat exchange efficiency between the hot air and wet wood chips as much as possible, Sunco Machinery design the special inner structure so that the wood chips can contact the hot air as much as possible, thus to increase the heat exchange efficiency.

4- Wide fuel application. The fuel can be waste wood, coal, diesel, natural gas, etc.

5- Sunco Machinery can produce well the hot air furnace well at the factory, and it will save much time and money for the buyer to produce the hot air furnace by themselves.

6- Energy Saving. Sunco Machinery Wood Chips Dryer has same quantity of chamber on the different direction of the rotary drum, the each part of the drum is same when the drum is rotating, as a result, it will need less power to make the drum run.

Inquiry
Note: Please feel free to give your inquiry in the form below. We will reply you with details within 24 hours.
Topic: *
Company:
Name: *
Tel: *
E-mail: *
Message: