drying machine
Welcome to Sunco Machinery  |  Site Map  |  Contact us

NEWS CENTER

You are here: Home > News & Events >> Industry News

Capacity 1 ton per hour wood chips dryer system

Time:2015年11月25日      Hits:

Capacity 1 ton per hour wood chips dryer system by Sunco Machinery mainly includes the following machines, and here we adopt the waste wood as fuel for the hot air furnace.

1. Belt Conveyor Model B500X8M which is used to send the wet wood chips into the wood chips dryer.

Belt Conveyor for the wood chips dryer

2. Wind Closing Device Model 200 type : To be installed on the inlet of the wood chips dryer, and avoid the ambient air into the wood chips drying system.


3. Waste Wood Fired Hot Air Furnace Model I Type which is used to burn the waste wood, and supply the hot air for the wood chips drying system.

Hot Air Furnace for the wood chips dryer

4. Wood Chips Dryer Model SC1512 which make the hot air heat the wet wood chips sufficiently.

Capacity 1 ton per hour wood chips dryer

5. Wind Closing Device Model 200 Type which is installed on the outlet of the wood chip dryer, and avoid the ambient air into the wood chip drying system.

6. Draft Fan Model Y5-47-5C which work with Cyclone Separator  to make the hot air into the wood chips dryer, and separate the dust from the flue gas.

Draft Fan for the wood chips dryer

7. Belt Conveyor B500X8M sends the dried wood chips to the store room.

8. Electric Control Panel is used to control all the above equipments. 

Electric Control Panel for the wood chips dryer

If you are interested to Sunco Machinery Capacity 1 ton per hour wood chips dryer system, please contact us at email: suncomachinery@hotmail.com 

Inquiry
Note: Please feel free to give your inquiry in the form below. We will reply you with details within 24 hours.
Topic: *
Company:
Name: *
Tel: *
E-mail: *
Message: