drying machine
Welcome to Sunco Machinery  |  Site Map  |  Contact us

NEWS CENTER

You are here: Home > News & Events >> Industry News

Main factors to influence the result of the wood chip drying

Time:2015年11月29日      Hits:

Main factors to influence the result of the wood chip drying are as follows:

  • Drying time

In order to heat the wood chip sufficiently, the enough drying time is very important to get the moisture content 13%-15% dried wood chips. 

In the New Design of Triple Pass Wood Chip Dryer by Sunco Machinery, the wood chips pass through the rotary dryer drum three times, and come to the high temperature zone two times, thus increase the drying time of the wood chip.

  • Temperature of the drying air

The temperature of the drying air can not too low, and the suitable temperature of the drying air is helpful to have a better drying efficiency on the result of the wood chip drying.

  • Layer thickness of the wood chips to be dried

In side the wood chip dryer, the necessary device should can make the wood chips as disperse as possible, so that the hot drying air can heat the wood chips evenly and sufficiently.

The New Design of Triple Pass Wood Chip Dryer by Sunco Machinery wonderfully solve this problem. The special inner design to make the layer thickness of wood chips is only 1/7 of the layer thickness of the old design rotary wood chips dryer.

  • Material state (e.g. coarsely/finely chopped material

Before being dried by the wood chip dryers, the customers is better to chop the wood chips as small and even as possible. 

wood chip drying, drying wood chip, wood chip dryer, wood chips dryer machine

Inquiry
Note: Please feel free to give your inquiry in the form below. We will reply you with details within 24 hours.
Topic: *
Company:
Name: *
Tel: *
E-mail: *
Message: