drying machine
Welcome to Sunco Machinery  |  Site Map  |  Contact us

NEWS CENTER

You are here: Home > News & Events >> Industry News

Dryer for wood chips

Time:2017年12月02日      Hits:

The purpose of our dryer machine is drying wood chips for energy purposes, to increase its calorific value, while using of the low-potential waste heat or normal fuel such as waste wood, coal, diesel, or natural gas, etc. The wood chip drying line output capacity can be designed in a large capacity range, depending on customer´s requirements, i.e. from hundreds kilograms up to tens of tons per hour.

Wood chips drying line controls the control system by Electric Control Panel.  

Dryer for wood chips, wood chips dryer, wood chip drying machine

Wood chips characteristic:  

Wood chips of each particle size: 10 - 100 mm

typical Average calorific value: 2270 kcal/kg of a single dose

typical Average water contents: 50% (summer 40%, winter 60%).

Dryer for wood chips, wood chips dryer, wood chip drying machine

Sunco Machinery Wood Chips Dryer can be designed according to the customers' actual situation as follows:

01. What is the initial moisture content (%) of the wet wood chips ?

02. What is the final moisture content (%) of the dried wood chips needed ?

03. What is the drying capacity (ton per hour) needed ?

04. What is the heat soure such as waste heat, or fuel such as waste wood, diesel, or natural gas, etc ?

05. What is the usual size (Length x Width x Thickness) of the wood chips ?

06. What is the bulk density (kg per cubic meter) of the wet wood chips ?

Sunco Machinery wood chips drying line work flow is as follows, which consist of inlet belt conveyor, hot air furnace, wood chip dryer machine, cyclone separator, induced draft fan, chimney, output belt conveyor, electric control panel, etc.

Dryer for wood chips, wood chips dryer, wood chip drying machine
Production time of the wood chips drying line usually takes about 1 month, depending on the type and size of the wood chip dryer and the production project of our factory.

Inquiry
Note: Please feel free to give your inquiry in the form below. We will reply you with details within 24 hours.
Topic: *
Company:
Name: *
Tel: *
E-mail: *
Message: