drying machine
Welcome to Sunco Machinery  |  Site Map  |  Contact us

NEWS CENTER

You are here: Home > News & Events >> Industry News

Dryer machine to lower humidity of wood chip

Time:2018年05月25日      Hits:

Sunco Machinery Rotary Dryer machine can be used to lower humidity of wood chip from about 50% to be about 15%-20% or as need. The dry wood chips can be used as high quality biomass fuel for the power plant, boiler, etc.

Dryer machine to lower humidity of wood chip, wood chip dryer, drying wood chip machine

If you are in need of Dryer machine to lower humidity of wood chip, please help to supply more information as follows:

(1) Usual size (Length x Width x Thickness) (mm) of the wood chips ?

(2) Loose bulk density (kg per cubic meter) of the wet wood chips ?

(3) Prefered fuel choice such as waste wood, wood chips, natural gas, or diesel, etc ?

(4) Initial moisture content (%) of the wet wood chips ?

(5) Final Output moisture content (%) of the dry wood chips needed ?

(6) Input capacity (tons per hour) needed ?

(7) Other special requirements if have.

Please directly send your requirements on the wood chip drying system to Sunco Machinery by email to :  

suncomachinery@hotmail.com  , we will contact you within 24 hours.

Wood Chips Dryer Working principle:

Dryer machine to lower humidity of wood chip, wood chip dryer, drying wood chip machine

Wood Chip Dryer mainly consists of a horizontally inclined rotating cylinder, air duct tube, hor air furnace, highpressure draught fan, electric control box, etc.

Wet wood chip are fed at the feed inlet hole, and discharged at the dischaging hole. It is direct-type heated rotary dryers, hot gases move through the cylinder in direct contact with the wet wood chips, either with or against the direction of the wood chips' moving direction. The cylinder is equipped with lifting plates which lift the wood chips, and shower it up and down through the hot flue gas.

Inquiry
Note: Please feel free to give your inquiry in the form below. We will reply you with details within 24 hours.
Topic: *
Company:
Name: *
Tel: *
E-mail: *
Message: