New Type Triple Pass Slag Dryer

08-08-2023 Hits：

New Type Triple Pass Slag Dryer Machine by Sunco Machinery is with 7 inner chambers, its heat efficiency is more high, meantime its drying capacity is high with less fuel consumption cost.

New Type Triple Pass Slag Dryer Machine is ideal for drying low humidity mineral material such as river sand, silica sand, fly ash, etc. It is also called slag dryer, slag drying machine, rotary slag dryers, etc.

New Type Triple Pass Slag Dryer, slag dryer, rotary slag dryer, slag drying machine,

New Type Triple Pass Slag Dryer Machine has the advantages as follows:

01. New design by Sunco for drying low humidity material with surface water in bulk production.

02. Compact Structure, less space occupation.

03. Special 7 chambers inner design, when working, each part's weight of the dryer is balance. Less motor power needed.

04. The slag will be flipped 7 times inside the dryer, and the flipping times is 2.3 times of the traditional drum dryer. Thus the material can be dispersed more sufficiently, and to be heated and dried by the hot air more sufficiently. As a result, the heat exchanging efficiency is higher, and its fuel consumption is lower.

05. The raw slag falling height inside the dryer is reduced much, thus the material abrasion to the lifting plates and dryer drum is less.

06. Higher heat efficiency. The drying time inside the slag dryer drum is about 15 minutes.

07. The slag output moisture content can be controlled by adjusting the exhaust air temperature and the drying time in the dryer.

08. In actual operation, its water evaporation intensity is more than 2 times of the traditional slag dryer, thus it has higher heat efficiency, and the operation cost is lower.

10. It adopts Gear Drive with better stability .

Note: For Gear Drive type, can add lubrication oil between the roller and ring to reduce the friction, reduce the abrasion of roller and Ring.

dried slag out of slag drying machine,