Rotary Dryer, Drying Machine, Raymond Mill, Stone Crusher

Home > Products > Powder Making Machine >

Feldspar Mill

Feldspar Mill can be used to grind feldspar into 40 mesh -325 mesh fine powder The powder output size of feldspar mill can be adjust continuously according to the customer s demand

Technical Parameters

Overview of Feldspar Mill :

Feldspar Mill  can be used to grind and process variety kinds of non-flammable and non-explosive materials with hardness less than 7 and humidity less than 6% such as feldsapr, dolomite, limestone, gypsum, barite, carbonate calcium, etc, in mining, construction, chemical industry, etc.

Feldspar Mill (Raymond Mill)is ideal grinding machine to grind and process feldspar, and the fine powder size can be 40 mesh to 325 mesh for industry usage. The powder output size of feldspar mill can be adjusted continuously according to the customers' demand. 

Advantages of feldspar Mill :

1. The whole feldspar mill plant is vertical structure of strong systematic characteristic, so it occupies small area. From crushing of feldspar to grinding and packing is an independent production system.

2. Compared with other milling plants, its passing ratio achieves 99%, this is what other mill can not reach.

3. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably.

4. Main parts of the whole plant are made from cast and steel of high quality. The technics is so subtly that insures the durability of whole plant.

5. The electric control system is centralized controlled, so the automaticity is high, no people are needed in the operating room.

Working Principle of Feldspar Mill :

01. Feldspar is crushed by jaw crusher or hammer crusher to the size required which is suitable for the Feldspar Mill (Raymond Mill).

02. Then the crushed feldspar are elevated into a hopper by bucket elevator from which the dolomite is transported through the electro-magnetic vibrating feeder evenly and continuously into the grinding chamber for feldspar grinding mill. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the feldspar, send to the middle between ring and roller to accomplish the grind.

03. After this, the ground feldspar are carried by the air from the blower into the powder separator (Analyzer Machine) for screening. The fine feldspar powders are blow into the cyclone powder collector and are poured out through the output-powder valve as the final products, and the corase feldspar after the screening will be recycled back into the grinding chamber for regrinding. The set’s airflow system is closely sealed up and circulated under condition of negative and positive pressure.

Technical Data of Feldspar Mill :




Roller Size


Max. Feed 

Size (mm)

Output Size








Overall Size



Notice: Any change of Feldspar Mill (Raymond Mill)technical data shall not be advised additionally.

If you are interested in our Feldspar Mill, please refer to: 

◆ Email: 

◆ Mobile/WhatsApp: +86 15838214261 

◆ Video:


go to top